
Compressor Processes Liquids | Works With Any Lift System | No Pneumatic Valves or Vessels | Automated Capacity Control | SkyView Reporting | Set & Forget PLC Control
After extensive research and development, we are thrilled to introduce the Wet Gas Compressor, The WGC is the only small-frame electric direct drive reciprocating compressor that is capable of processing liquids – including liquid slugs – through itself. The WGC pictured is 30hp and has a 5 inch cylinder, with a maximum differential pressure of 200 psi and flow approximately 1.5x that of our CHC1050. Several power, flow and pressure configurations are available.
Standard Features
- Highly efficient electric drive reciprocating compressor
- Rates up to 360 mscf/d @ 30psi suction
- Maximum ∆P up to 480psi
- 150% more capacity than our largest HCG
- 100% turndown capability
- Easily processes liquids: slugs and entrained fluids
- Ideally suited for casing gas and VRU applications
- Optimized power utilization
- No hydraulic system to maintain
- Extremely robust intake and discharge valve design
- Compression element can be serviced on site
- No additional lifting equipment required for overhaul
- Superior user interface – web browser HMI
- All other features of HCG Compressor
- Liquid handling capability – can process 100% liquids intermittently, at reduced capacity, and up to 5% of displacement at full speed
- Capable of handling both steady entrained liquids and large slugs
- Simple and reliable
- Few moving parts
- No pneumatic valves, separator or liquid pumps
- Low speed, long stroke compression cycle
- Low cost –easy to replace wear parts
- Seals mounted in single piece seal cartridge for quick replacement
- High shut in pressure rating – 1100 psi standard, 1500 (ANSI 600) optional – typically no ESD required
- VFD speed control and auto start/stop
- Easy and inexpensive to install and move
- NACE (MRO175) materials standard
Motor | 30 hp 3-phase TEFC electric motor |
Operating Pressure Range | 0 - 500 psi 0-1500 psi optional |
Flow Range | 35 - 750 mscfd |
WGC30 Compressor Weight | 3,500 lbs/1,587 kgs |
Control Panel Weight | 1,000 lbs/205 kgs |
Compressor Dimensions (on Base) | Length: 96"/2.44m Width: 36"/0.91m Height: 45"/1.14m |
Control Panel Dimensions(on Base) | Length: 37"/0.94m Width: 37"/0.94m Height: 65"/1.65m |
Casing Gas Compression (Sweet & Sour Service) |
VRU - Vapour Recovery Applications |
Performance
WGC 30hp Motor - Projected Performance
DISCHARGE PRESSURE Max ΔP: 200 psi / 1380 kPa | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
SUCTION(psig/kPag) |
PSI kPa |
75 520 |
100 700 |
125 860 |
150 1035 |
175 1205 |
200 1380 |
225 1550 |
250 1725 |
275 1900 |
300 2070 |
5 35 |
130 3.7 |
124 3.5 |
117 3.3 |
110 3.2 |
104 3.0 |
98 2.8 |
|||||
10 70 |
174 5.0 |
166 4.8 |
159 4.5 |
152 4.3 |
145 4.1 |
138 4.0 |
|||||
15 105 |
218 6.2 |
209 6.0 |
202 5.8 |
194 5.5 |
183 5.2 |
170 4.9 |
|||||
20 140 |
261 7.5 |
253 7.2 |
244 7.0 |
232 6.6 |
213 6.1 |
198 5.7 |
|||||
30 210 |
349 10.0 |
340 9.7 |
330 9.4 |
300 8.6 |
274 7.8 |
254 7.2 |
224 6.4 |
||||
40 275 |
438 12.5 |
427 12.2 |
416 11.9 |
373 10.6 |
337 9.6 |
310 8.9 |
273 7.8 |
||||
50 345 |
528 15.1 |
516 14.7 |
504 14.4 |
452 12.9 |
404 11.5 |
369 10.5 |
322 9.2 |
283 8.1 |
|||
75 520 |
742 21.2 |
727 20.8 |
703 20.1 |
601 17.2 |
535 15.3 |
460 13.1 |
399 11.4 |
373 10.7 |
|||
100 700 |
955 27.3 |
938 26.8 |
879 25.1 |
749 21.4 |
629 18.0 |
571 16.3 |
492 14.1 |
459 13.1 |
|||
125 860 |
1168 33.4 |
1149 32.8 |
1054 30.1 |
894 25.5 |
747 21.3 |
633 18.1 |
584 16.7 |
||||
150 1035 |
1381 39.5 |
1360 38.8 |
1228 35.1 |
1039 29.7 |
863 24.6 |
733 20.9 |
|||||
175 1205 |
1595 45.6 |
1571 44.9 |
1403 40.1 |
1184 33.8 |
980 28.0 |
||||||
200 1380 |
1808 51.7 |
1781 50.9 |
1575 45 |
1326 37.9 |
|||||||
Projected Performance based on 2500 ft, gas density .665, temp 68ºF – Flow Rates in mscfd e3m3/d | |||||||||||
Drive Ratio | |||||||||||
Low 7.5" (12.3:1) | |||||||||||
Medium 6.3"(14.7:1) | |||||||||||
High 5.2" (17.8:1) |